
Crawler One Compatible Parts

Crawler One Compatible Parts
Crawler One is a 4-track robot tank you assemble, then drive from your phone, tablet or browser — over your home WiFi or across the planet. Live HD video, tilt-to-steer, voice commands, and a customizable on-screen control panel. Powered by a real Raspberry Pi, so you can hack, extend and grow with it.
Choose your kit:
• Chassis Kit — All chassis parts: track frames, drive cogs, 64 track links, shells, top & floor covers, Pi/Pico cases. No electronics. Bring your own Pi, motors, etc. Intermediate · soldering required.
• Builder Kit — Chassis Kit + 4× drive motors, camera tilt servo, motor controller, power module, illuminated master switch, wiring harness, and all hardware. Drop in any Raspberry Pi (Zero 2 W, 3, 4 or 5) and you're driving. Intermediate · soldering required.
• Complete Kit — Same as Builder, but we do the soldering and the Pi setup for you. Open the box, snap on the tracks, scan the QR code, drive. Beginner · no tools needed.
What you can do with it:
• Drive from anywhere — phone, tablet or browser, anywhere with internet
• Live HD video stream — see what the robot sees, low-latency WebRTC
• Tilt to steer — tilt your phone, the tracks follow
• Tilt the camera with an on-screen slider
• Voice control — talk to your robot, AI does the rest
• Custom controls — ask the AI to build buttons, sliders, joysticks for any add-on you bolt on
• Built around a real Raspberry Pi — yours to hack, extend, upgrade
What you'll need (not in the kit):
• Soldering iron, multimeter, screwdriver (Chassis & Builder kits)
• 2S Li-ion 7.4 V battery with XT30 (any standard 2S hobby pack with an XT30 plug — your local RC / hobby shop)
• microSD card (8 GB+) for the Pi
• Raspberry Pi (only for Chassis Kit — included in the others)
Build time:
• Chassis & Builder Kits: ~3–4 hours assembly
• Complete Kit: ~10 minutes unboxing
Includes lifetime firmware updates, free iOS & Android app, browser dashboard, illustrated online build manual, and friendly support if you get stuck.
Genuine replacements for this kit.

Micro Servo 9g — FS90 with Position Feedback

Illuminated Metal Push-Button Power Switch — LED Ring · IP65 · 16/19/22 mm

Geared DC Motor — Set of 4

Constant Voltage Current Step Down Buck Converter Module DC-DC 5V-32V to 0.8V-30V 5A adjust Lithium Battery Charger Board

Camera Module Board REV 1.3 5MP Webcam Video 1080p 720p — Raspberry Pi Compatible

Robot Build Hardware Kit