Autonomous Ducted FPV Drone — HD Live Camera, Low-Latency Remote Control | Robo Kids

Kids Drone Starter is a ready-to-fly ducted-fan FPV drone built to be safe indoors and fast outdoors. Weighs in at 249 grams — right under the 250 g registration threshold in most countries, so you can fly it in the park without paperwork. The four brushless motors sit inside carbon-fibre ducts, so brushed rotors don't chew up walls, furniture or fingers. Real Raspberry Pi–connected flight controller means the RobotiMaker AI agent can pilot it, hold position, follow a subject, or return to home on command. Designed for makers age 12 and up with a responsible adult nearby.

What's in the box:

• Fully assembled ducted-fan drone frame with 4× brushless motors, 4× tri-blade props and 4× carbon-fibre ducts

• EMAX-class flight controller pre-flashed and tuned

• FPV camera and 5.8 GHz video transmitter (VTX)

• Whip-style diversity antennas

• 4S 650 mAh LiPo battery with XT30 connector

• LiPo charger with balance leads

• Prop guards and a spare prop set

• Illustrated quick-start guide and QR code to the online build manual

Built to fly indoors AND outdoors:

• 249 g take-off weight — sub-250 g means most countries do not require registration

• Ducted brushless motors — safe around walls, furniture and pets

• Sub-3" prop diameter — legal for indoor sport in most jurisdictions

• 4S LiPo power — punchy climb-outs and 4-6 minute flight times

• Whoop-frame stiffness — survives coffee-table launches and low-branch encounters

• Bright status LEDs — always know which side is forward and which is battery-low

What you can do with it:

• Fly from anywhere — phone, tablet or browser, low-latency HD video down and control up

• Tilt to steer, or use an on-screen dual-joystick layout

• Voice control — tell the AI to "climb 2 metres", "orbit that tree", "come home"

• Position hold — GPS + optical flow keeps it hovering steady while you compose the shot

• Return-to-home — one button and it flies back to the take-off point

• Video recording — every flight streams to the RobotiMaker dashboard and saves to the SD card

• Real Raspberry Pi bridge on the ground — hack, extend, and add sensors

What you'll need (not in the kit):

• A phone or tablet running the RobotiMaker app (free for iOS + Android)

• A wall socket for the balance charger

• Optional: additional LiPo packs for longer sessions

• A responsible adult supervising the first flights and any outdoor use

Fly time and safety:

• Ready to fly out of the box, no tools required

• 4-6 minutes per battery, 3-minute charge with the included charger

• Practice indoors with prop guards fitted before the first outdoor flight

• Local rules apply — check your country's model-aircraft or drone regulations

Includes lifetime firmware updates, free iOS & Android app, browser dashboard, illustrated online build manual with pre-flight checklist and battery-care tips, and friendly support if you get stuck.