Sand & Snow Super Crawler — All-Terrain AI Rover with Live Camera | Robo Kids

Kids Max Rover is a heavy-duty all-terrain tracked robot built for the surfaces most robots quit on — deep powder snow, dry dune sand, thick mud, gravel and long grass. Aggressive spiked tracks bite in where wheels spin, sealed drive housings keep moisture and grit out, and a real Raspberry Pi runs the show, so the RobotiMaker AI agent can drive, patrol, film and adapt on the fly. Designed for makers age 12 and up.

Choose your kit:

• Chassis Kit — All chassis parts: track links, drive cogs, spike inserts, sealed drivetrain shells, top and floor covers, Pi/Pico cases. No electronics. Bring your own Pi, motors, battery and controller. Intermediate · soldering required.

• Builder Kit — Chassis Kit plus 4× brushed drive motors with sealed encoders, camera tilt servo, motor controller, power module with reverse-polarity guard, illuminated master switch, full wiring harness, and every fastener. Drop in any Raspberry Pi (Zero 2 W, 3, 4 or 5) and you're driving. Intermediate · soldering required.

• Complete Kit — Same as Builder, but we do the soldering, the Pi setup and the tuning for you. Open the box, snap on the tracks, scan the QR code, drive across the snow. Beginner · no tools needed.

Built for the terrain most robots quit on:

• Aggressive spiked tracks — bite into loose snow, powder and dry sand where wheels just spin

• Sealed drive housings — drivetrain and encoders stay safe from moisture, grit and salt

• High-torque brushed motors + steel gearing — climbs slopes with load, holds a line in mud

• Deep ground clearance sized for snow drifts and dune runs

• Bright LED headlights — night driving, dawn/dusk video, dune-crest silhouettes

• Rated water-resistant to IPX4 — splashes and slush are fine, don't submerge it

What you can do with it:

• Drive from anywhere — phone, tablet or browser, over your home WiFi or across the planet

• Live HD video stream — see what the robot sees, low-latency, stable framerate

• Tilt to steer, or use an on-screen joystick or d-pad

• Voice control — tell the AI where to go, what to film, when to return

• Custom widgets — drag-and-drop your own buttons, sliders and gauges (no code needed)

• Real Raspberry Pi under the hood — hack, extend, upgrade at will

What you'll need (not in the kit):

• Soldering iron, multimeter, hex keys (Chassis & Builder kits only)

• 3S Li-ion 11.1 V battery pack with XT30 (standard hobby-store item)

• microSD card (16 GB+) for the Pi

• Raspberry Pi (only for Chassis Kit — included in Builder and Complete)

Build time:

• Chassis & Builder Kits: ~3–4 hours assembly

• Complete Kit: ~10 minutes unboxing, then drive

Includes lifetime firmware updates, free iOS & Android app, browser dashboard, illustrated online build manual with cold-weather + sand-driving tips, and friendly support if you get stuck.